Home About us Products Services Contact us Member Bookmark
I am looking for  
Categories

Product Catalogue

CCTV Kits

CCTV Cameras

CCTV Cameras II

HD-SDI Camera

DVR Stand Alone

Video Capture Card

CCTV Lens

Megapixel Lens

2.0 Megapixel IP Camera

1.3 Megapixel IP Camera

Megapixel HD Series

Standard IP Camera

Special Camera

Vehicle Surveillance System

Speed Dome and Pan Tilts

Portable DVR Series

UTP Video Balun

CCTV Accessories

CCTV Tester

Alarm System

Video Door Phone

Access Control System

HD-CVI Camera

Best seller
 
 
 
 
Contact information

General Enquiry:
sales@krovision.com
krovision@gmail.com
Technical Support::
support@krovision.com
MSN: ldb0229@hotmail.com
Skype:ldb0229

Speed Dome and Pan Tilts > Speed Dome > KV5203
KV5203
Features

Products Name: Auto Tracking Panoramic Camera

As an Auto Tracking Panoramic Camera, KV5203 has two video sources and output on one monitor. The panoramic camera features 175 degrees FOV for motion detection in wide range and a camera on dome driver for tracking. All video processing is embedded in the dome, that makes KV5203 is able to auto track individually without any separate controller or software.
 
Three video outputs mode:
   ★ PTZ mode: Dome camera video
   ★ FISHEYE mode: Panoramic camera video
   ★ Mixture mode: Composite video by panoramic camera and dome camera
Tracking mode: Manual tracking/Auto tracking/Circle tracking
All video processing is embedded in dome, implement auto tracking individually
Firmware update by RS485
Compatiable with touch screen system
Programmable detection sensitivity
Specification:
 
Specifications
KV5203
Pan Range
360° continuous
Pan Speed
Manual: 0.01°/s-120°/s
Tilt Range
-90°~0°
Tilt Speed
Manual: 0.01°/s-120°/s
Communication
RS485/RS422
Proportional Pan/Tilt Control
YES
Number of Preset
Up to 128
Private Zones
8 Zones
Auto Scan
Up to 5 lines,configurable speed, based on OSD function
Auto Cruise
Up to 8 groups, configurable dwell time, based on OSD function
Keep Watch
(Park Action)
Programmed a preset, an auto scan line or an auto cruise group, based on OSD function
Pattern
1 line, 200 commands
Auto Flip
YES
OSD Menu
Chinese/English
Timing Task
Programmed a preset, an auto scan line or an auto cruise group, based on OSD function
Scheduled Task
Weekly configuration
PTZ Position Display
YES
Tracking Mode
Manual /Auto /Circle
Available motion detected target
Up to 10
Detection sensitivity
1~50 programmable
Detection mask zone
Configurable mask zone with no detection
Load factory (settings)
Load default factory configuration
Alarm input
1 Input
Alarm output
1 Relay Output
Alarm actions
Respond by calling a preset
Video Output
Main output: PTZ / FISHEYE / Mixure
Aux output: FISHEYE
FOV of Panoramic
-18° ~ 90°
Video Output Mode
PTZ / FISHEYE / Mixture
Touch Screen
Optional, supported by Touch Screen System
RS-485 Protocols
PELCO-P, PELCO-D
Baud Rate
2400/4800/9600/19200 bps
Power Supply
24VAC±25%
Power Consumption
Dome: Less than 20W. Heater: Less than 50W
Operation Temperature/Humidity
-35℃ ~ +65℃, 90% or less(without condensation)
Water and Dust Resistance
IP66 standard compliance
Surge Protection
Built-in Lightning and Surge Protection
Dimensions(DxH)
Φ220mm×282(h)mm
Weight (approx.)
4.0kg

    

Home  About us   Products  Services  Live demos  Contact us 
Copyright (c) 2010 All Rights Reserved.